BYU Reconfigurable Logic Lab Tutorials
BYU Reconfigurable Logic Lab Tutorials
These tutorials are intended to simplify the learning of new FPGA based
boards and tools int the configurable computing lab. We have a number
of other tutorials under development. Please let us know if you think
we need to develop additional tutorials for any of the hardware or
software in the lab.
Recent Tutorials
- Using the Xilinx
Alliance 3.1i/3.3i Tools under Linux (public version)
- How to get the Xilinx Alliance 3.1i/3.3i Tools working under Linux
and Wine.
- JHDL:
Getting Started
- An introduction in how to start using JHDL.
- Viewlogic: Getting Started
- Provides the steps necessary to access ViewLogic and to
complete the on-line Digital Design tutorial.
- Getting Started with Xilinx M1
- This document provides a brief summary of information which will
help you set up your environment and start some of the new
Xilinx M1 tools.
- Using Mentor's QuickVHDL and
Synplicity's Synplify with Wildforce
- A brief explanation of how to use Mentor's QuickHDL,
Synplicity's Synplify, and Xilinx Alliance M1
tools with Wildforce designs.
- Introduction to WildForce
- A basic overview of WildForce with a couple of simple demos to
get you started.
Old Tutorials
- Using the Xilinx Alliance 2.1i
Tools under Linux (public version)
- How to get the Xilinx Alliance 2.1i Tools working under Linux
and Wine.
- Setting Up for Synposys
- Provides the steps necessary to set up an HP-UX environment to
run a variety of Synopsys tools.
- Hierarchical Synthesis Example
- Provides a simple example of the tradeoffs for two ways of
synthesizing a hierarchical design in SYNOPSYS.
- CLAY Setup Tutorial
- Provides the instructions necessary to access Clay libraries
for Viewlogic and use the CLAyTool suite.
- VHDL To CLAY Tutorial
- Provides the instructions necessary for synthesizing VHDL into
CLAY.
- CLAy Design & Interact Tutorial
- Provides the instructions necessary to design with Clay Libraries,
generate a Clay netlist, and place & route the design in interact.
- BYU Splash 2 Tutorials
- Provides a design flow overview, environment setup instructions,
and step-by-step design tutorials for Splash 2 as setup at BYU.
- BYU TERAMAC VHDL Tutorials
- Provides a design flow overview, environment setup instructions,
and step-by-step design tutorials for VHDL synthesis to TERAMAC as
developed at BYU.
- BYU Altera Tutorials
- Provides information for compiling Altera designs with Synopsys
and MAX+PLUS2
- GigaOps Tutorial
- Provides a step by step tutorial for getting started with the
Giga Operations Reconfigurable Computing Platform. Also
provides a summary of important things to know.
- Getting Started with Trianus on
the HP700s
- Provides the basic information for setting up your HP
environment to begin using Trianus and how to start Oberon.
Also included are suggestions on how to become familiar with the
Oberon system.
- Getting Started with Khoros/Cantata
- Provides a brief summary of information which will help you set
up your environment, start "cantata", and learn about the
Khoros/Cantata environment.
Go to the CCL Home Page
Last modified: Mon Jul 16 14:31:23 MDT 2001
Please send comments to:
grahamp@ee.byu.edu