-- this is my default .synopsys_vss.setup file

-- it is placed in my home directory so that any synopsys
-- commands can be executed from anywhere. Where these settings
-- are inapproriate, they can be ADDED TO by placing a new
-- .synopsys_vss.setup file in the directory of interest

--WAVEFORM        = WIF

-- For the bug in 3.1b
RESFUNC_OPT     = no_opt

-- Others...
TIMEBASE        = NS
HELPDIR         = $SYNOPSYS/doc/sim/help/
WINDOW          = $SYNOPSYS/$SIM_ARCH/sim/bin/window.X11
--MKVHDLSIM_ARCHIVE = $SYNOPSYS/$SIM_ARCH/sim/lib/libvhdlsim.a $SYNOPSYS/$SIM_ARCH/sim/lib/libsimbus.a 
GPPHELP         = $SYNOPSYS/doc/sim/help/gpp.hlp
METAMICRO       = $SYNOPSYS/$SIM_ARCH/sim/bin/micro
ALLOCATOR       = $SYNOPSYS/$SIM_ARCH/sim/bin/cater
INTERPRETER     = $SYNOPSYS/$SIM_ARCH/sim/bin/inter
MERGE           = $SYNOPSYS/$SIM_ARCH/sim/bin/merge
-- original use
-- USE          = $SYNOPSYS/$SIM_ARCH/sim/packages $SPLASH2/lib/sim $SPLASH2/simulator/interface $SPLASH2/simulator/s2board $SPLASH2/lib/extras $SPLASH2/lib/dbc .

USE             = . $SYNOPSYS/$SIM_ARCH/sim/packages $SPLASH2/lib/sim $SPLASH2/simulator/interface $SPLASH2/simulator/s2board 

-- WORK library set to the default library
WORK            > DEFAULT
-- DEFAULT is just where I place all my stuff
DEFAULT		: ./work
SYNOPSYS	: $SYNOPSYS/$SIM_ARCH/packages/synopsys/lib
DWARE		: $SYNOPSYS/packages/dware/lib
IEEE		: $SYNOPSYS/packages/IEEE/lib
GTECH		: $SYNOPSYS/packages/gtech/lib
DW01		: $SYNOPSYS/dw/dw01/lib
DW02		: $SYNOPSYS/dw/dw02/lib
DW03		: $SYNOPSYS/dw/dw03/lib
DW04		: $SYNOPSYS/dw/dw04/lib
DW05		: $SYNOPSYS/dw/dw05/lib
DW06		: $SYNOPSYS/dw/dw06/lib
DW07		: $SYNOPSYS/dw/dw07/lib
flex8000_fpga_ftsm : /fpga3/cad/altera/maxplus2/synopsys/library/alt_pre/flex8000/lib/flex8000_fpga_ftsm
flex8000_fpga_ftgs : /fpga3/cad/altera/maxplus2/synopsys/library/alt_pre/flex8000/lib/flex8000_fpga_ftgs
altera		: /fpga3/cad/altera/maxplus2/synopsys/library/alf_mf/lib

-- Have this point to your local ripp10 library
RIPP10		: ~grahamp/src/ripp10/lib